CPE Snap-In

All Products / Captive Screws / Metric Captive Screws / CPE Snap-In


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tag:


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

Thread Thread Code Screw Length Code Shank Length Code L Sheet
Thickness ØD ØG
Min.
B
M3.5 x 0.6 M3.5 0.80 A 1.10 1.00/0.50 6.40/6.30 7.50 2.00
2.40
4.00
5.60
2.40 B 1.70 1.60/1.00 2.60
4.00
5.60
2.40 C 2.60 2.50/1.60 3.50
4.00
5.60
4.00 D 3.30 3.20/2.50 4.20
5.60
5.60 E 5.10 5.00/3.20 6.00
M4 x 0.7 M4 1.10 A 1.10 1.00/0.50 6.40/6.30 7.50 2.00
2.70
4.30
5.90
2.70 B .170 1.60/1.00 2.60
4.30
5.90
2.70 C 2.60 2.50/1.60 3.50
4.30
5.90
4.30 D 3.30 3.20/2.50 4.20
5.90
5.90 E 5.10 5.00/3.20 6.00
M5 x 0.8 M5 1.10 A 1.10 1.00/0.50 6.40/6.30 7.50 2.00
2.70
4.30
5.90
2.70 B 1.70 1.60/1.00 2.60
4.30
5.90
2.70 C 2.60 2.50/1.60 3.50
4.30
5.90
4.30 D 3.30 3.20/2.50 4.20
5.90
5.90 E 5.10 5.00/3.20 6.00
General (Continued)
ØE P1 P2 P3 H1 H2 K Max. Total Float of Screw in Ferrule Cross-Recess Size Six-Lobe Recess Size
Cross- recess and/or Slot Heads Six-Lobe recess Heads
11.50 0.80 5.60 0.00 15.40 10.60 0.00 0.00 0.8 #2 T15
2.40 7.20 0.40
4.00 8.80 2.00
5.60 10.40 3.60
2.40 7.20 0.00
4.00 8.80 1.40
5.60 10.40 3.00
2.40 7.20 0.00
4.00 8.80 0.50
5.60 10.40 2.10
4.00 8.80 0.00
5.60 10.40 1.40
5.60 10.40 0.00
13.00 1.10 5.60 0.00 15.70 11.20 0.30 1.30 0.9 #2 T25
2.70 7.20 0.70
4.30 8.80 2.30
5.90 10.40 3.90
2.70 7.20 0.10
4.30 8.80 1.70
5.90 10.40 3.30
2.70 7.20 0.00
4.30 8.80 0.80
5.90 10.40 2.40
4.30 8.80 0.10
5.90 10.40 1.70
5.90 10.40 0.00
13.00 1.10 5.60 0.00 15.70 11.20 0.30 1.30 0.9 #2 T25
2.70 7.20 0.70
4.30 8.80 2.30
5.90 10.40 3.90
2.70 7.20 0.10
4.30 8.80 1.70
5.90 10.40 3.30
2.70 7.20 0.00
4.30 8.80 0.80
5.90 10.40 2.40
4.30 8.80 0.10
5.90 10.40 1.70
5.90 10.40 0.00

Material & Finish

Material/Finish
Code
Retainer Spring & CPD Washer Knob Screw
Material Finish Material Finish Material Finish Material Finish
J 6000-Series
Aluminum
Plain 300-Series Stainless Steel Passivate3 6000-Series
Aluminum
Natural Heat-Treated
Carbon Steel
Zinc1
K Black
Powder Coat
Zinc and Black
Powder Coat2
L Natural 400-Series Stainless Steel Passivate3
M Black
Powder Coat
Passivate and
Black Powder Coat4

Installation

  1. Prepare sheet as shown for non–flush or flush installation. Lightly chamfer top edge of hole if drilled. For installation with sheet near maximum thickness, lightly deburr outside edge of hole as well.
  2. Install captive screw in sheet hole from punched or chamfered side using light pressure.

Drives

DriveDescription
TX6 - Lobe
PHCross Recess
SLSlotted
SL-TXSlotted - 6 - Lobe
SL-PHSlotted - Cross Recess