Dimensions
| Thread | Thread Code | Screw Length Code | Shank Length Code | L | Sheet | |||
| Thickness | ØD | ØG Min. |
B | |||||
| M3.5 x 0.6 | M3.5 | 0.80 | A | 1.10 | 1.00/0.50 | 6.40/6.30 | 7.50 | 2.00 |
| 2.40 | ||||||||
| 4.00 | ||||||||
| 5.60 | ||||||||
| 2.40 | B | 1.70 | 1.60/1.00 | 2.60 | ||||
| 4.00 | ||||||||
| 5.60 | ||||||||
| 2.40 | C | 2.60 | 2.50/1.60 | 3.50 | ||||
| 4.00 | ||||||||
| 5.60 | ||||||||
| 4.00 | D | 3.30 | 3.20/2.50 | 4.20 | ||||
| 5.60 | ||||||||
| 5.60 | E | 5.10 | 5.00/3.20 | 6.00 | ||||
| M4 x 0.7 | M4 | 1.10 | A | 1.10 | 1.00/0.50 | 6.40/6.30 | 7.50 | 2.00 |
| 2.70 | ||||||||
| 4.30 | ||||||||
| 5.90 | ||||||||
| 2.70 | B | .170 | 1.60/1.00 | 2.60 | ||||
| 4.30 | ||||||||
| 5.90 | ||||||||
| 2.70 | C | 2.60 | 2.50/1.60 | 3.50 | ||||
| 4.30 | ||||||||
| 5.90 | ||||||||
| 4.30 | D | 3.30 | 3.20/2.50 | 4.20 | ||||
| 5.90 | ||||||||
| 5.90 | E | 5.10 | 5.00/3.20 | 6.00 | ||||
| M5 x 0.8 | M5 | 1.10 | A | 1.10 | 1.00/0.50 | 6.40/6.30 | 7.50 | 2.00 |
| 2.70 | ||||||||
| 4.30 | ||||||||
| 5.90 | ||||||||
| 2.70 | B | 1.70 | 1.60/1.00 | 2.60 | ||||
| 4.30 | ||||||||
| 5.90 | ||||||||
| 2.70 | C | 2.60 | 2.50/1.60 | 3.50 | ||||
| 4.30 | ||||||||
| 5.90 | ||||||||
| 4.30 | D | 3.30 | 3.20/2.50 | 4.20 | ||||
| 5.90 | ||||||||
| 5.90 | E | 5.10 | 5.00/3.20 | 6.00 | ||||
General (Continued)
| ØE | P1 | P2 | P3 | H1 | H2 | K Max. | Total Float of Screw in Ferrule | Cross-Recess Size | Six-Lobe Recess Size | |
| Cross- recess and/or Slot Heads | Six-Lobe recess Heads | |||||||||
| 11.50 | 0.80 | 5.60 | 0.00 | 15.40 | 10.60 | 0.00 | 0.00 | 0.8 | #2 | T15 |
| 2.40 | 7.20 | 0.40 | ||||||||
| 4.00 | 8.80 | 2.00 | ||||||||
| 5.60 | 10.40 | 3.60 | ||||||||
| 2.40 | 7.20 | 0.00 | ||||||||
| 4.00 | 8.80 | 1.40 | ||||||||
| 5.60 | 10.40 | 3.00 | ||||||||
| 2.40 | 7.20 | 0.00 | ||||||||
| 4.00 | 8.80 | 0.50 | ||||||||
| 5.60 | 10.40 | 2.10 | ||||||||
| 4.00 | 8.80 | 0.00 | ||||||||
| 5.60 | 10.40 | 1.40 | ||||||||
| 5.60 | 10.40 | 0.00 | ||||||||
| 13.00 | 1.10 | 5.60 | 0.00 | 15.70 | 11.20 | 0.30 | 1.30 | 0.9 | #2 | T25 |
| 2.70 | 7.20 | 0.70 | ||||||||
| 4.30 | 8.80 | 2.30 | ||||||||
| 5.90 | 10.40 | 3.90 | ||||||||
| 2.70 | 7.20 | 0.10 | ||||||||
| 4.30 | 8.80 | 1.70 | ||||||||
| 5.90 | 10.40 | 3.30 | ||||||||
| 2.70 | 7.20 | 0.00 | ||||||||
| 4.30 | 8.80 | 0.80 | ||||||||
| 5.90 | 10.40 | 2.40 | ||||||||
| 4.30 | 8.80 | 0.10 | ||||||||
| 5.90 | 10.40 | 1.70 | ||||||||
| 5.90 | 10.40 | 0.00 | ||||||||
| 13.00 | 1.10 | 5.60 | 0.00 | 15.70 | 11.20 | 0.30 | 1.30 | 0.9 | #2 | T25 |
| 2.70 | 7.20 | 0.70 | ||||||||
| 4.30 | 8.80 | 2.30 | ||||||||
| 5.90 | 10.40 | 3.90 | ||||||||
| 2.70 | 7.20 | 0.10 | ||||||||
| 4.30 | 8.80 | 1.70 | ||||||||
| 5.90 | 10.40 | 3.30 | ||||||||
| 2.70 | 7.20 | 0.00 | ||||||||
| 4.30 | 8.80 | 0.80 | ||||||||
| 5.90 | 10.40 | 2.40 | ||||||||
| 4.30 | 8.80 | 0.10 | ||||||||
| 5.90 | 10.40 | 1.70 | ||||||||
| 5.90 | 10.40 | 0.00 | ||||||||
Material & Finish
| Material/Finish Code |
Retainer | Spring & CPD Washer | Knob | Screw | ||||
| Material | Finish | Material | Finish | Material | Finish | Material | Finish | |
| J | 6000-Series Aluminum |
Plain | 300-Series Stainless Steel | Passivate3 | 6000-Series Aluminum |
Natural | Heat-Treated Carbon Steel |
Zinc1 |
| K | Black Powder Coat |
Zinc and Black Powder Coat2 |
||||||
| L | Natural | 400-Series Stainless Steel | Passivate3 | |||||
| M | Black Powder Coat |
Passivate and Black Powder Coat4 |
||||||
Installation
- Prepare sheet as shown for non–flush or flush installation. Lightly chamfer top edge of hole if drilled. For installation with sheet near maximum thickness, lightly deburr outside edge of hole as well.
- Install captive screw in sheet hole from punched or chamfered side using light pressure.
Drives
| Drive | Description |
|---|---|
| TX | 6 - Lobe |
| PH | Cross Recess |
| SL | Slotted |
| SL-TX | Slotted - 6 - Lobe |
| SL-PH | Slotted - Cross Recess |