CPA | Self-Clinching

All Products / Captive Screws / Metric Captive Screws / CPA | Self-Clinching


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tag:


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

ThreadThread
Code
Screw
Length
Code
SheetØCØEP1
Min.
Thickness
Hole
Size
Min. Dist.
Hole Center
to Edge
M3 x 0.5M30.800.905.64/5.568.405.5010.600.80
2.502.50
4.004.00
5.605.60
M3.5 x 0.6M3.50.500.906.43/6.359.606.3011.500.50
2.102.10
3.703.70
5.305.30
M4 x 0.7M40.600.908.00/7.9212.007.9013.000.60
2.202.20
3.803.80
5.405.40
M5 x 0.8M50.600.908.00/7.9212.007.9013.000.60
2.202.20
3.803.80
5.405.40
M6 x 1.0M60.500.909.60/9.5014.259.5014.700.50
2.102.10
3.703.70
5.305.30
General (Continued)
P2P3H1H2K Max.Total Float
of Screw
in Ferrule
Cross
Recess
Size
Six-Lobe
Recess
Size
Anvil
ØM
Cross Recess
and/or Slot
Heads
Six-Lobe
Recess
Heads
3.800.0011.308.300.000.000.7#1T103.40/3.10
5.501.60
7.003.10
8.604.70
5.300.0015.9011.100.000.00.08#2T153.90/3.60
6.901.20
8.502.80
10.104.40
5.500.0016.2011.300.301.30.08#2T254.60/4.30
7.101.30
8.702.90
10.304.50
5.500.0016.2011.300.301.30.06#2T255.40/5.10
7.101.30
8.702.90
10.304.50
7.100.0020.0013.400.301.300.8#2T306.40/6.10
8.701.20
10.302.80
11.904.40

Material & Finish

Material/Finish
Code
RetainerSpring & CPD WasherKnobScrew
MaterialFinishMaterialFinishMaterialFinishMaterialFinish
EHeat-Treated
Carbon Steel
Zinc1300-Series Stainless SteelPassivate36000-Series
Aluminum
NaturalHeat-Treated
Carbon Steel
Zinc1
FBlack
Powder Coat
Zinc and Black
Powder Coat2
GNatural400-Series Stainless SteelPassivate3
HBlack
Powder Coat
Passivate and Black Powder Coat4

 

  1. Zinc SC1 .0002″ (5 μm) min. with Type III Clear Chromate per ASTM B 633.
  2. Zinc SC1 .0002″ (5 μm) min. with Type III Clear Chromate per ASTM B 633 and black powder coat (screw head only).
  3. Passivate per ASTM A 967.
  4. Passivate per ASTM A 967 and black powder coat (screw head only).

 

Installation

  1. Punch or drill hole in sheet. Do not deburr edges.
  2. Insert captive screw in sheet hole and anvil as shown.
  3. Squeeze the captive screw and sheet between parallel punch and anvil surfaces. Use only enough pressure to seat the retainer shoulder flush with the sheet. Punch and anvil should be made from hardened steel.

Drives

DriveDescription
TX6 - Lobe
PHCross Recess
SLSlotted
SL-TXSlotted - 6 - Lobe
SL-PHSlotted - Cross Recess