CPE Snap-In

All Products / Captive Screws / Inch Captive Screws / CPE Snap-In


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tag:


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

ThreadThread
Code
Screw
Length
Code
Shank
Length
Code
LSheet
ThicknessDG Min.B
6-32632.030A.040.040/.020.252/.248.295.080
.090
.160
.220
.090B.070.060/.040.100
.160
.220
.090C.080.080/.060.130
.090D.100.100/.060.140
.160
.220
.160E.130.130/.100.170
.220
.220F.200.200/.130.240
8-32832.040A.040.040/.020.252/.248.295.080
.110
.170
.230
.110B.070.060/.040.100
.170
.230
.110C.100.100/.060.140
.170
.230
.170D.130.130/.100.170
.230
.230E.200.200/.130.240
10-321032.040A.040.040/.020.252/.248.295.080
.110
.170
.230
.110B.070.060/.040.100
.170
.230
.110C.100.100/.060.140
.170
.230
.170D.130.130/.100.170
.230
.230E.200.200/.130.240
General (Continued)
ØEP(1)P(2)P(3)H(1)H(2)K Max.Total Float
of Screw
In Ferrule
Cross-
Recess
Size
Six-Lobe
Recess
Size
Cross-
Recess
and/or Slot
Heads
Six-Lobe
Recess
Heads
.450.030.220.000.610.420.000.000.03#2T15
.090.280.010
.160.350.080
.220.410.140
.090.280.000
.160.350.060
.220.410.120
.090.280.000
.090.280.000
.160.350.020
.220.410.080
.160.350.000
.220.410.050
.220.410.000
.510.040.220.000.620.440.012.050.03#2T25
.110.280.030
.170.350.090
.230.410.150
.110.280.010
.170.350.070
.230.410.130
.110.280.000
.170.350.030
.230.410.090
.170.350.000
.230.410.060
.230.410.000
.510.040.220.000.620.440.000.040.03#2T25
.110.280.030
.170.350.090
.230.410.150
.110.280.010
.170.350.060
.230.410.130
.110.280.000
.170.350.030
.230.410.090
.170.350.000
.230.410.060
.230.410.000

Material & Finish

Material/Finish
Code
RetainerSpring & CPD WasherKnobScrew
MaterialFinishMaterialFinishMaterialFinishMaterialFinish
J6000-Series
Aluminum
Plain300-Series Stainless SteelPassivate36000-Series
Aluminum
NaturalHeat-Treated
Carbon Steel
Zinc1
KBlack
Powder Coat
Zinc and Black
Powder Coat2
LNatural400-Series Stainless SteelPassivate3
MBlack
Powder Coat
Passivate and
Black Powder Coat4

Installation

  1. Prepare sheet as shown for non–flush or flush installation. Lightly chamfer top edge of hole if drilled. For installation with sheet near maximum thickness, lightly deburr outside edge of hole as well.
  2. Install captive screw in sheet hole from punched or chamfered side using light pressure.

Drives

DriveDescription
TX6 - Lobe
PHCross Recess
SLSlotted
SL-TXSlotted - 6 - Lobe
SL-PHSlotted - Cross Recess