General
| Insert Thread | Insert Thread Code | Boss | A Head Thickness | C Head Diameter | D Insert Diameter | P Pilot Diameter |
|---|
| B Hole Dia. +0.10 -0.00 | W Wall Thickness Min. |
|---|
| M1 x 0.25 | M1 | 1.75 | 0.70 | — | — | 2.10 | 1.70 |
| M1.2 x 0.25 | M1.2 | 1.75 | 0.70 | — | — | 2.10 | 1.70 |
| M1.4 x 0.3 | M1.4 | 2.15 | 0.80 | 0.40 | 3.00 | 2.50 | 2.10 |
| M1.6 x 0.35 | M1.6 | 2.15 | 0.80 | 0.40 | 3.00 | 2.50 | 2.10 |
| M2.0 x 0.4 | M2.0 | 2.65 | 0.80 | 0.40 | 3.50 | 3.00 | 2.60 |
| M2.5 x 0.45 | M2.5 | 3.20 | 1.00 | 0.40 | 4.00 | 3.65 | 3.15 |
Insert Length
| Insert Thread | L Insert Length | Insert Length Code |
|---|
| M1 | 2.50 | 2.50 |
| M1.2 | 2.50 | 2.50 |
| M1.4 | 3.00 | 3.00 |
| M1.6 | 2.00 | 2.00 |
| 2.20 | 2.20 |
| 2.50 | 2.50 |
| 3.00 | 3.00 |
| M2.0 | 3.00 | 3.00 |
| M2.5 | 4.00 | 4.00 |
installation
Pre-heating is the recommended installation method. The insert should be hot enough to soften the plastic without melting it to avoid flash around the top. Avoid excessive pressure that would force an insert into a hole without allowing the plastic to properly soften and flow around the insert features.
