SSZS | Screw Studded Zerts

All Products / Inserts for Plastic / Inch Inserts for Plastic - Zerts / SSZS | Screw Studded Zerts


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tags: ,

Features

  • Self-tapping installation in a variety of materials.
  • High pull-out resistance in weak plastics.
  • Suitable for applications where jack-out is unavoidable.


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

General
Insert ThreadInsert Thread CodeL Insert LengthInsert Length CodeBoss Hole Dia. BA Head ThicknessC Head DiameterD Insert Diameter Max.
Thermo– plastics +.004 -.000Thermo– setting +.004 -.000
2-56256.236236.157-.161.161-.169.023.236.177
4-40440.236236.157-.161.161-.169.023.236.177
6-32632.315315.209-.213.217-.224.029.295.236
8-32832.315315.228-.232.236-.244.035.312.256
10-241024.394394.280-.283.287-.299.042.374.315
10-321032.394394.280-.283.287-.299.042.374.315
1/4-202520.551551.339-.346.354-.370.052.472.394
1/4-282528.551551.339-.346.354-.370.052.472.394
5/16-183118.591591.417-.425.433-.449.052.551.472
5/16-243124.591591.417-.425.433-.449.052.551.472
3/8-163716.709709.496-.504.512-.528.062.630.551
3/8-243724.709709.496-.504.512-.528.062.630.551
1/2-135013.866866.575-.583.591-.606.062.709.630
1/2-205020.866866.575-.583.591-.606.062.709.630
Stud Length
Stud ThreadStud Thread CodeD Insert Diameter Max.S-Stud Length
.187.250.312.375.437.500.625.750.8751.000
Stud Length Code
2-56256.177187250312
4-40440.177187250312375437
6-32632.236187250312375437500
8-32832.256187250312375437500625
10-241024.315187250312375437500625750
10-321032.315187250312375437500625750
1/4-202520.3942503123754375006257508751000
1/4-282528.3942503123754375006257508751000
5/16-183118.4723123754375006257508751000
5/16-243124.4723123754375006257508751000
3/8-163716.5513754375006257508751000
3/8-243724.5513754375006257508751000
1/2-135013.6305006257508751000
1/2-205020.6305006257508751000

Boss Design Recommendation

The SSZ Screw Zert is designed to be installed into a straight hole with a 1°inclusive taper. The recommended hole size applies at the point reached by the bottom of the insert. Molded holes should be used wherever possible as drilled holes may result in diminished performance. PENCOM recommends a 60°countersink, with a depth equal to the external thread pitch of the insert being used, at the top of the hole to prevent chipping of the surrounding boss hole surface. Hole diameters are dependant on the type of plastic being used with harder plastics requiring larger holes than softer plastics, for example. Diameter ranges shown in the tables are those recommended for thermoplastics and thermosetting plastics with the exact hole size determined through testing in the application.

Installation

The slot in the insert acts as a thread cutting edge. Inserts are installed following standard tapping procedures using hand tools or conventional tapping equipment.

Material & Finish

Material CodeMaterial DescriptionFinish CodeFinish Description
SSStainless Steel

Contact a PENCOM Account Representative for other material & finish options.