SSZ | Screw Zerts

All Products / Inserts for Plastic / Inch Inserts for Plastic - Zerts / SSZ | Screw Zerts


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tags: ,


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

Insert ThreadInsert Thread CodeL Insert LengthInsert Length CodeBoss Hole Dia. BA Head ThicknessC Head DiameterD Insert Diameter Max.
Thermo– plastics +.004 -.000Thermo– setting +.004 -.000
2-56256.236236.157-.161.161-.169.023.236.177
4-40440.236236.157-.161.161-.169.023.236.177
6-32632.315315.209-.213.217-.224.029.295.236
8-32832.315315.228-.232.236-.244.035.312.256
10-241024.394394.280-.283.287-.299.042.374.315
10-321032.394394.280-.283.287-.299.042.374.315
1/4-202520.551551.339-.346.354-.370.052.472.394
1/4-282528.551551.339-.346.354-.370.052.472.394
5/16-183118.591591.417-.425.433-.449.052.551.472
5/16-243124.591591.417-.425.433-.449.052.551.472
3/8-163716.709709.496-.504.512-.528.062.630.551
3/8-243724.709709.496-.504.512-.528.062.630.551
1/2-135013.866866.575-.583.591-.606.062.709.630
1/2-205020.866866.575-.583.591-.606.062.709.630

(1) All dimensions are in inches and reference unless toleranced.
(2) Pencom recommends determining the minimum hole wall thickness through testing in the application.

Boss Design Recommendation

The SSZ Screw Zert is designed to be installed into a straight hole with a 1°inclusive taper. The recommended hole size applies at the point reached by the bottom of the insert. Molded holes should be used wherever possible as drilled holes may result in diminished performance. PENCOM recommends a 60°countersink, with a depth equal to the external thread pitch of the insert being used, at the top of the hole to prevent chipping of the surrounding boss hole surface. Hole diameters are dependant on the type of plastic being used with harder plastics requiring larger holes than softer plastics, for example. Diameter ranges shown in the tables are those recommended for thermoplastics and thermosetting plastics with the exact hole size determined through testing in the application.

Installation

The slot in the insert acts as a thread cutting edge. Inserts are installed following standard tapping procedures using hand tools or conventional tapping equipment.

Material & Finish

Material CodeMaterial DescriptionFinish CodeFinish Description
SSStainless Steel

Contact a PENCOM Account Representative for other material & finish options.