P – Wheel with pneumatic tyres

The pneumatic tyres in the P series have a ply rating of 2 or 4 and are available with a ribbed profile or a zig-zag profile. The rim is made of pressed steel and has a welded tubular steel hub. With a hardness of 60° Shore A, the black tyre provides extremely good floor preservation and low-noise operation.

Pneumatic tyres in the P series are available as drive wheels PA series. Soft rubber wheels in the VW series can also be used as a puncture-proof alternative.

  • Wheel: Pneumatic tyre with ribbed profile.
  • Color: grey.
  • Wheel centre/rim: Made of pressed steel, with tubular steel hub, zinc-plated, blue-passivated, Cr6-free.
  • Tyre mounted on rim.
  • Color: silver.
  • Chemical characteristics: Chemical resistance to many aggressive substances, except oils.
  • Operating temperature: -25° C to +50° C.
  • Wheel and tyre dimensions are valid for unloaded, new tyres and their width and diameter may slightly change during operation.
  • For wheels with ball bearings speeds up to max.
  • 16 km/h are permissible with reduced load capacity.
Part Desc.Weight (KG)Wheel Ø(D) [mm]Tire width (T2) [mm]Load capacity [kg]Bearing typeAxle bore Ø(d) [mm]Hub length (T1) [mm]Tread & tire hardnessWheel Center