CPB | Broaching

All Products / Captive Screws / Metric Captive Screws / CPB | Broaching


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tag:


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

ThreadThread
Code
Screw
Length
Code
SheetØCØEP(1)P(2)
Min.
Thickness
Hole
Size
M3 x 0.5M31.501.65.70/5.556.1010.601.504.60
3.303.306.10
4.804.807.60
6.406.409.40
M3.5 x 0.6M3.51.401.66.50/6.306.9011.501.406.20
3.003.007.80
4.604.609.40
6.206.2011.00
General (Continued)
P(3)H(1)H(2)Total Float
of Screw
in Ferrule
Crossrecess
Size
Six-Lobe
Recess
Size
Anvil
ØM
0.0011.208.400.7#1T103.20
1.70
3.20
4.80
0.0014.8010.000.8#2T153.70
1.40
3.00
4.60

  1. All dimensions are reference unless toleranced.
  2. Pull–out force 80 lbs and side load force against unfastened knob 45 lbs based on drilled holes in G-10 PC board. Variations in panel hole size, thickness,material andinstallation methods will affect the loads. Pencom recommends testing in the application.Contact your account representative for samples.

Material & Finish

Material/Finish
Code
RetainerSpring & CPD WasherKnobScrew
MaterialFinishMaterialFinishMaterialFinishMaterialFinish
A300-Series
Stainless
Steel
Passivate3300-Series Stainless SteelPassivate36000-Series
Aluminum
NaturalHeat-Treated
Carbon Steel
Zinc1
BBlack
Powder Coat
Zinc and Black
Powder Coat2
CNatural400-Series Stainless SteelPassivate3
DBlack
Powder Coat
Passivate and Black Powder Coat4


(1) Zinc SC1 .0002″ (5 μm) min. with Type III Clear Chromate per ASTM B 633.
(2) Zinc SC1 .0002″ (5 μm) min. with Type III Clear Chromate per ASTM B 633 and black powder coat (screw head only).
(3) Passivate per ASTM A 967
(4) Passivate per ASTM A 967 and black powder coat (screw head only).

Installation

  1. Punch or drill hole in sheet. Do not deburr edges.
  2. Insert captive screw in sheet hole and anvil as shown.
  3. Squeeze the captive screw and sheet between parallel punch and anvil surfaces. Use only enough pressure to seat the retainer shoulder flush with the sheet. Punch and anvil should be made from hardened steel.

Drives

DriveDescription
TX6 - Lobe
PHCross Recess
SLSlotted
SL-TXSlotted - 6 - Lobe
SL-PHSlotted - Cross Recess