CNB | Broaching

All Products / Captive Screws / Metric Captive Screws / CNB | Broaching


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tag:

Features

  • Narrow design for limited space applications.
  • New contemporary appearance.
  • Install easily in p.c. boards, aluminum sheets, castings and other soft materials.
  • Choice of RoHS-compliant materials and finishes.


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

ThreadThread
Code
Screw
Length
Code
SheetA
(Shank)
Max.
C
±0.08
E
±0.25
P1
Ref.
Minimum
Thickness
Hole
Size
+0.08
-0.00
Minimum
Distance
Hole Center
to Edge
M3 x 0.5M31.531.536.735.11.537.197.921.53
4.714.71
M3.5 x 0.6M3.51.531.537.146.61.537.598.741.53
4.714.71
7.887.88
ThreadThread
Code
Screw
Length
Code
P2
±0.40
P3
±0.64
H1
Max.
H2
Ref.
Drive Size
Cross-
Recess
Six-LobeSlot
M3 x 0.5M31.536.350.009.4013.72#1T–101.02W
1.02D
4.719.533.18
M3.5 x 0.6M3.51.536.350.009.6513.72#2T–151.30W
1.19D
4.719.533.18
7.8812.706.35

Material & Finish

Material
Code
Material DescriptionFinish
Code
Finish DescriptionFor Use in
Sheet Hardness
RetainerScrewSpringRetainerScrewSpringHRB 70
Max.
HRB 60
Max.
P.C.
Board
SS300-Series
Stainless Steel
400-Series
Heat Treated
Stainless Steel
300-Series
Stainless Steel
BLK-NITBlack
Nitride
Black
Nitride
Passivated
and/or
Tested per
ASTM
A 967
SS300-Series
Stainless Steel
400-Series
Heat Treated
Stainless Steel
300-Series
Stainless Steel
PPassivated
and/or
Tested per
ASTM
A 967
Passivated
and/or
Tested per
ASTM
A 967
Passivated
and/or
Tested per
ASTM
A 967
STLCarbon SteelHeat Treated
Carbon Steel
300-Series
Stainless Steel
NIBright Nickel
per ASTM B
689
Type II,
Class 5
Bright Nickel
per ASTM B
689
Type II,
Class 5
Passivated
and/or
Tested per
ASTM
A 967

Installation & Performance

  1. Prepare correct sized mounting hole in sheet. Do not deburr hole edges.
  2. Insert fastener in recessed anvil, locate sheet hole over captive screw shank and center punch over screw thread.
  3. Squeeze the fastener between concentric and parallel anvil and punch surfaces. Use only enough pressure to seat the reatainer shoulder flush with the sheet. Anvil and punch should be made from hardened tool steel or may be ordered using the PENCOM part numbers shown in the tables below.
Anvil And Punch Dimensions
Thread
Code
AnvilPunch
A
±0.05
C
±0.05
Part
Number
D
±0.05
Part
Number
M38.769.09TL13145.01TL1309
M3.58.769.91TL13155.44TL1304
Performance
Thread
Code
Material
Code
Test Sheet Material
1.53mm FR-4 Fiberglass
Installation
(kN)
Push-out
(N)
M3SS, STL1.1245
M3.5SS, STL1.8267

Performance data represents the average destructive result when all installation specifications are strictly followed. Variations in panel hole size, thickness, material, and installation methods will affect the loads. PENCOM strongly encourages testing in the application.

Drives

DriveDescription
PHCross Recess
SLSlotted