CPC | Flare-In

All Products / Captive Screws / Inch Captive Screws / CPC | Flare-In


Clear

Use the fields above to design your part and request a quote.

Product Description: N/A Category: Tag:


When second sourcing PENCOM’s products, PENCOM recommends that the part is tested in the application to ensure that it will meet all performance requirements.

Dimensions

ThreadThread
Code
Screw
Length
Code
Shank
Length
Code
LSheetØCØE
ThicknessØDB
±.005
4-40440.030A.041.058/.031.192/.187.015.181.420
.100
.160
.220
.060B.070.100/.059.015
.130
.190
.250
.100C.104.156/.100.031
.160
.220
.160D.166.219/.157.093
.100
.220E.229.281/.220.156
6-32632.040A.070.125/.058.218/.213.015.210.450
.110
.170
.230
.110B.135.189/.125.062
.170
.230
.170C.197.250/.189.125
.230
.230D.260.312/.250.189
8-32832.040A.070.125/.058.271/.266.015.262.510
.110
.170
.230
.110B.135.189/.125.062
.170
.230
.170C.197.250/.189.125
.230
.230D.260.312/.250.189
10-321032.040A.070.125/.058.271/.266.015.262.510
.110
.170
.230
.110B.135.189/.125.062
.170
.230
.170C.197.250/.289.125
.230
.230D.260.312/.250.189
1/4-200420.050A.070.125/.058.328/.323.015.319.580
.110B.135.187/.126.062
.170C.197.250/.188.125
.240D.260.312/.251.187
.110E.070.125/.058.015
.170
.240
.170F.135.187/.126.062
.240
.240G.197.250/.188.125
General (Continued)
P1P2P3H1H2K Max.Total Float
of Screw
in Ferrule
Cross-Recess
Size
Six-Lobe
Recess
Size
Cross-
Recess
and/or Slot
Heads
Six-Lobe
Recess
Heads
.030.160.000.450.320.000.000.000#1T10
.100.220.059
.160.280.119
.220.350.179
.060.190.000
.130.250.060
.190.310.120
.250.370.180
.100.220.000
.160.280.056
.220.350.116
.160.280.000
.100.220.000
.220.350.000
.040.240.000.600.410.000.000.03#2T15
.110.300.040
.170.360.100
.230.430.160
.110.300.000
.170.360.035
.230.430.095
.170.360.000
.230.430.000
.230.430.130
.040.240.000.610.410.012.050.03#2T25
.110.300.040
.170.360.100
.230.430.160
.110.300.000
.170.360.035
.230.430.095
.170.360.000
.230.430.000
.230.430.130
.040.240.000.610.410.000.040.03#2T25
.110.300.040
.170.360.100
.230.430.160
.110.300.000
.170.360.035
.230.430.095
.170.360.000
.230.430.000
.230.430.130
.040.240.000.610.410.000.040.03#2T25
.110.300.040
.170.360.100
.230.430.160
.110.300.000
.170.360.035
.230.430.095
.170.360.000
.230.430.033
.230.430.000
.050.310.000.760.500.000.040.03#2T30
.110.370.000
.170.430.000
.240.500.000
.110.370.000
.170.430.100
.240.500.017
.170.430.035
.240.500.105
.240.500.043

Material & Finish

Material/Finish
Code
RetainerSpring & CPD WasherKnobScrew
MaterialFinishMaterialFinishMaterialFinishMaterialFinish
J6000-Series
Aluminum
Plain300-Series Stainless SteelPassivate36000-Series
Aluminum
NaturalHeat-Treated
Carbon Steel
Zinc1
KBlack
Powder Coat
Zinc and Black
Powder Coat2
LNatural400-Series Stainless SteelPassivate3
MBlack
Powder Coat
Passivate and
Black Powder Coat4


(1) Zinc SC1 .0002″ (5 μm) min. with Type III Clear Chromate per ASTM B 633.
(2) Zinc SC1 .0002″ (5 μm) min. with Type III Clear Chromate per ASTM B 633 and black powder coat (screw head only).
(3) Passivate per ASTM A 967
(4) Passivate per ASTM A 967 and black powder coat (screw head only).

Installation

  1. Punch or drill hole in sheet. Do not deburr edges.
  2. Insert captive screw in sheet hole and anvil as shown.
  3. Squeeze the captive screw and sheet between parallel punch and anvil surfaces. Use only enough pressure to seat the retainer shoulder flush with the sheet. Punch and anvil should be made from hardened steel.
Punch Dimensions
ThreadØF+.003-.000GMin.
4-40.123.75
6-32.143.75
8-32.169.75
10-32.202.75
1/4-20.2531.00

Drives

DriveDescription
TX6 - Lobe
PHCross Recess
SLSlotted
SL-TXSlotted - 6 - Lobe
SL-PHSlotted - Cross Recess