3D drawings available upon request
| Part Desc. | Hole Diameter | Material Thickness | Material | Finish | |
|---|
| Hole
Diameter
Code | H
Hole
Diameter | Ball Stud
Pull-out
Tension
lbs (N)
±30% | Material
Thickness
Code | T
Material
Thickness | A | B | C | E |
|---|
| 105 | .105 | 3.5 | 012 | .012 | .970 | .440 | .685 | .220 |
| 8.0 | 017 | .017 |
| 12.0 | 022 | .022 |
| 18.0 | 028 | .028 |
| 30.0 | 031 | .031 |
| 135 | .135 | 3.5 | 012 | .012 | .970 | .440 | .685 | .220 |
| 8.0 | 017 | .017 |
| 12.0 | 022 | .022 |
| 18.0 | 028 | .028 |
| 30.0 | 031 | .031 |
| 145 | .145 | 3.5 | 012 | .012 | .970 | .440 | .685 | .220 |
| 8.0 | 017 | .017 |
| 12.0 | 022 | .022 |
| 18.0 | 028 | .028 |
| 30.0 | 031 | .031 |
- Drill or punch clip mounting and ball stud clearance holes in sheet.
- Rivet the ball stud clip onto the sheet with either plain or 100° countersunk head rivets (plain rivet installatoin
shown on left) or with screws, nuts and washers (shown on right).
