Self-clinching Standoffs - Zins

TS – Self-clinching Sheet-Loc™ Fastener

Download Product Flier

3D CAD Models available. Contact a PENCOM Account Representative to request.

Part Description Example

  • TSSS
  • .060
  • FR
  • P
Request A Quote

*Contact a PENCOM Account Representative for the part number based on the description.

Features

  • Join two sheets together by simply sliding the top panel into place for a quick attachment and detachment of removable components.
  • Use several TJ Sheet-Loc™ Fasteners with one PENCOM NG Flush Nut to prevent unwanted top sheet movement, and reduce installation time and excess hardware.
  • Can be installed in a blind hole to conceal fastener head.

Material and Finish

300-Series Stainless Steel / Passivated and/or Tested per ASTM A 967. (Other RoHS-compliant materials and finishes available by request.)

TS Self-clinching Features

Application

TS Self-clinching Application

Inch

Panel 1Panel 2
Mounting Hole B
+.003
-.000
Sheet Hardness Max.Sheet Thickness Min.Edge Distance C1 Min.Mounting hole AMaterialThicknessEdge Distance C2 Min.
A1 nom.A2
±.003
A3
±.003
A4
Min.
.213HRB 70.039 (1).150.059.118.197.148Metal or
P.C. Board
. 057 Ð .064.160

Metric

Panel 1Panel 2
Mounting Hole B
+0.08
-0.00
Sheet Hardness Max.Sheet Thickness Min.edge Distance C1 Min.Mounting hole AMaterialThicknessEdge Distance C2 Min.
A1 nom.A2
±0.08
A3
±0.08
A4
Min.
5.41HRB 701.00 (1)3.811.503.005.003.75Metal or
P.C. Board
1.45 - 1.624.10

Thru-hole Installation

  • For a thru-hole application punch or drill hole in sheet. Do not deburr edges.
  • Insert fastener into the anvil and locate sheet hole over the fastener shank as shown.
  • Squeeze the sheet and fastener flange between parallel punch and anvil surfaces. Use only enough pressure to seat the flange flush with the sheet. Punch and anvil may be ordered using PENCOM part numbers TL1287 and TL1363, respectively, or made from hardened tool steel.
TS Self-clinching Thru-hole Install

Blind Hole Installation

  • For a blind hole application mill a properly sized blind hole .043” (1.10mm) deep minimum in sheet. Do not deburr edges.
  • Insert fastener into the anvil and locate sheet hole over the fastener shank as shown.
  • Squeeze the sheet and fastener flange between parallel punch and anvil surfaces. Use only enough pressure to seat the flange flush with the sheet. Punch and anvil may be ordered using PENCOM part numbers TL1287 and TL1363, respectively, or made from hardened tool steel.
TS Self-clinching Blind-hole Install

Performance

Inch

Test Sheet Material
.060" 5052-H34 Aluminum.060" Cold-Rolled Steel
Installation
(lbs)
Push-out
(lbs)
Side Load Max. (lbs)Installation
(lbs)
Push-out
(lbs)
Side Load Max. (lbs)
11001201202100160185

Metric

Test Sheet Material
1.52mm 5052-H34 Aluminum1.52mm Cold-rolled Steel
Installation
(kN)
Push-out
(N)
Side Load Max. (N)Installation
(kN)
Push-out
(N)
Side Load
Max. (N)
4.95335339.3711822
TS Self-clinching Performance