SD | High-Strength

All Products / Self-clinching Hardware / Inch Self-clinching Studs / SD | High-Strength


Clear
Product Description: N/A Category: Tags: ,

Dimensions

Thread Thread
Code
Sheet Thickness MIN Hole Size in Sheet
+.005/-.000
Hole in Attached Parts MAX H
±.01
S MAX T MAX Dist. Hole C/L to Edge MIN
10 – 32 1032 .050 .190 .250 .300 .105 .040 .415
1/4 – 20 0420 .060 .250 .312 .380 .125 .050 .460
5/16 – 18 0518 .075 .312 .375 .480 .140 .070 .500
3/8 – 16 0616 .090 .375 .437 .580 .155 .085 .530
(L) Length ±.015
.500 .750 1.00 1.25 1.50 1.75 2.00

Material & Finish

Material CodeMaterial DescriptionFinish CodeFinish Description
S4400 Series Stainless SteelP Passivated
STCarbon Steel (ST)Z Zinc Clear
PBPhosphor BronzeP Passivated
SSStainless SteelP Passivated

Contact a PENCOM Account Representative for other material & finish options.

Cross References

Subsitute For PEM® Series: HFH, HFHB, HFHS

PEM® is a registered trademark of Penn Engineering.

PENCOM Part Description PEM® Part Number
SDPB-0420-.750-PLNHFHB-0420-12
SDPB-0420-1.00-PLNHFHB-0420-16
SDPB-0616-.750HFHB-0616-12
SDPB-1032-.500-PLNHFHB-032-8
SDPB-1032-.750-PLNHFHB-032-12X
SDSS-0420-.500-PHFHS-0420-8
SDSS-0420-.750-PHFHS-0420-12
SDSS-0420-1.25-PHFHS-0420-20
SDSS-0420-1.50-PHFHS-0420-24
SDSS-0518-.750-SS-PHFHS-0518-12
SDSS-0518-1.00-PHFHS-0518-16
SDSS-0518-1.25-PHFHS-0518-20
SDSS-0616-1.25-PHFHS-0616-20
SDST-0420-.500-ZHFH-0420-8ZI
SDST-0420-.750-ZHFH-0420-12ZI
SDST-0420-1.00-ZHFH-0420-16ZI
SDST-0420-1.25-ZHFH-0420-20ZI
SDST-0420-1.50-ZHFH-0420-24ZI
SDST-0518-.500-ZHFH-0518-8ZI
SDST-0518-1.00-ZHFH-0518-16ZI
SDST-0518-1.250-ZHFH-0518-20ZI
SDST-0518-1.75-ZHFH-0518-28ZI
SDST-0518-2.000-ZHFH-0518-32ZI
SDST-0616-.500-ZHFH-0616-8ZI
SDST-0616-.750-ZHFH-0616-12ZI
SDST-0616-1.00-ZHFH-0616-16ZI
SDST-0616-1.25-ZHFH-0616-20ZI
SDST-0616-1.50-ZHFH-0616-24ZI
SDST-0616-1.75-ZHFH-0616-28