GM | Male Thread Guide Pins

All Products / Guide Pins / Metric Guide Pins / GM | Male Thread Guide Pins


Clear
Product Description: N/A Category: Tag:

Features

  • Precisely aligns stacked and/or mating panels and chasses.
  • Male thread design requires no special installation tools.
  • Wide range of thread sizes, pin diameters and lengths accommodates most alignment requirements. Custom sizes available by request.
  • See Pencom GR guide pin nuts for a complete alignment solution.
  • Choice of RoHS compliant materials and finishes.

Dimensions

General
Size Code Thread Sheet ØB
+0.00
-0.08
C
Max.
D
Nom.
ØF
+0.00
-0.08
T
Min.
WAF
Nom.
Minimum
Thickness
Hole Size
+0.08
-0.00
M3 M3 x 0.5 0.76 3.02 3.00 0.71 1.27 3.00 6.35 3.97
M4 M4 x 0.7 0.76 4.01 3.99 0.71 1.27 3.99 6.35 4.76
M5 M5 x 0.8 0.76 5.00 4.98 0.71 1.27 4.98 7.14 5.57
M6 M6 x 1.0 0.76 5.99 5.97 0.71 1.27 5.97 7.92 6.35
Length – 60° Point
Size Code L (Length Code) +0.00/-0.25
6 8 10 12 15 20 25
S Ref.
M3 4.15 6.15 8.15 10.15 13.15 18.15 23.15
M4 3.30 5.30 7.30 9.30 12.30 17.30 22.30
M5 2.40 4.40 6.40 8.40 11.40 16.40 21.40
M6 3.55 5.55 7.55 10.55 15.55 20.55
Length – 30° Point
Size Code L (Length Code) +0.00/-0.25
8 10 12 15 20 25 30
S Ref.
M3 3.50 5.50 7.50 10.50 15.50 20.50 25.50
M4 4.00 6.00 9.00 14.00 19.00 24.00
M5 4.50 7.50 12.50 17.50 22.50
M6 6.00 11.00 16.00 21.00

Technical Data

Size Code Thread Installation Torque1 (N-m) Minimum Thread Engagement1
M3 M3 x 0.5 0.32- 0.43 3.0
M4 M4 x 0.7 0.8-1.1 4.0
M5 M5 x 0.8 1.4-1.9 5.0
M6 M6 x 1.0 2.8-3.8 6.0

(1) Installation torques are for zinc–plated carbon steel nuts used with zinc–plated carbon steel guide pins and for reference only. Pencom recommends testing in the application.

Material & Finish

Material CodeMaterial DescriptionFinish CodeFinish Description
STCarbon Steel (ST)Z Zinc Clear
SSStainless SteelP Passivated

Contact a PENCOM Account Representative for other material & finish options.